How to Clean Your RotoSelect

To dust the outside: Wipe the top with a dry microfiber cloth or T-Shirt. Do not use a paper towel. Alternatively, blow compressed air or air duster across the top of the case.

To clean the inside: It is possible to remove the entire top of the RotoSelect with the included 2.5mm allen key. This will give you complete access to the inside for cleaning.

To remove the top for cleaning, watch the video guide below or follow the step by step instructions:

  1. Remove all EDC items from the unit.
  2. Set the RotoSelect on its side and remove the four center screws with the 2.5mm allen key.
  3. Put the unit back down facing up. Use the 2.5mm allen key to remove all 8 screws in the black bezel. Remove the bezel and put it to the side.
  4. Insert your hand through the opening in the top of the case and squeeze the two sides of the support piece together until it can fit through the hole in the center of the main gear.
  5. Remove the top, place to the side and clean the inside of the unit as desired.
  6. To re-assemble, follow steps 2-5 in reverse order.

TIP: When reinstalling the 4 center screws on the base, use the 3mm allen key to align the holes while you use the 2.5mm allen key to fasten the screws.